Epoxy Floor Cost in Frederick, Maryland

Epoxy floor cost in Frederick, Maryland ranges from $5.90 to $9.80 per square foot. Epoxy garage floor costs approximately $1,500 to $2,400 for a 1-car garage (250-sf garage). To get a more accurate cost for your epoxy floor project, request a quote.

By HomeBlue Team

Updated May 18, 2021 06:25 PM

Get Matched to Epoxy Floor Installers Near You

Find an Epoxy Floor Installer in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates

How Much Does an Epoxy Floor Cost in Frederick, MD?

This guide is intended to provide you an approximate cost to apply epoxy floor coatings on concrete in your area. To get a quote for your specific project, Click Here for a Free Estimate. Our research, which includes feedback provided by local epoxy floor installers, resulted in the following epoxy floor prices in Frederick, MD.

Epoxy flooring cost per square foot in Frederick:

Epoxy floor cost in Frederick, Maryland ranges from $5.90 to $9.80 per square foot. This includes preparing the floor and applying the coating. The type of material used will impact the cost of your floor coating project. For instance, if you are looking to apply a concrete stain or a concrete paint, then the cost will be less than if you use a more expensive epoxy floor coating.

Epoxy garage floor cost in Frederick:

Epoxy garage floor cost in Frederick, Maryland ranges from $1,500 to $9,600 depending on the size of your garage and the condition of your concrete garage floor.

Garage floor coating cost based on the size of your garage:

Epoxy garage floor cost (1 car garage, 250-sf): $1,500 to $2,400.
Epoxy garage floor cost (2 car garage 500-sf): $3,000 to $4,800.
Epoxy garage floor cost (3 car garage, 750-sf): $4,500 to $7,200.
Epoxy garage floor cost (4 car garage, 1,000-sf): $6,000 to $9,600.

Epoxy basement floor cost in Frederick:

Epoxy basement floor cost in Frederick, Maryland ranges from $2900 to $14700 depending on the size of your basement, coating product you choose, and the condition of your basement floor. Epoxy basement floor paint is used as a basement floor sealer and prices are typically determined on a square foot basis.

Basement floor coating cost based on the size of your basement:

Epoxy basement floor cost (500-sf) $3,900 (range $2,900 to $4,900).
Epoxy basement floor cost (1,000-sf) $7,800 (range $5,800 to $9,800).
Epoxy basement floor cost (1,000-sf) $11,700 (range $8,700 to $14,700).

Free Quotes from Concrete Coating Contractors

Find a Concrete Coating Contractor in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Click to Get Quotes

Factors that Influence Epoxy Floor Cost in Frederick

When a contractor comes to your house to provide you an estimate, they will consider a number of factors that can increase or decrease the cost of your project. Pricing for your epoxy floor project will vary based on the type of coating you choose, the size of the area to be coated, and the condition of the concrete. Here are a few things to keep in mind:

Your prices may be higher when:

You have a large floor, garage, or basement.
Your floor is uneven and needs to be leveled.
The concrete is in poor condition (cracked, broken).
The surface requires powerwashing or pressure cleaning.
You decide to apply a top coat for extra protection.
Items in the garage or basement need to be moved in order to complete the project.
You use a solid epoxy or a solvent epoxy.

Your prices may be lower when:

Your have a small floor, garage, or basement.
The concrete floor is in excellent condition (no cracks or broken areas).
The floor is clean and requires little prep work.
Leveling is not required.
The space is empty and nothing needs to be moved.
You use a water based epoxy.

Price(less) Quotes from Epoxy Floor Contractors Near Frederick, MD

Castle Floor Epoxy At Castle Floor Epoxy, the preparation of the garage floor is of utmost importance and is critical to ensure maximum adhesion of our coating systems. We begin by grinding your concrete floor utilizing walk-behind diamond floor grinders to create an industry standard CSP3 (Concrete Surface Profile). We use industrial grade coating systems manufactured by a select few of the largest and technologically-advanced, polymer coating suppliers in the country.

DC Generals Concrete Coatings No matter what, DC Generals is e-committed to providing you safe, courteous service. You can now get your free estimate virtually. We'll use Zoom to discuss your project, answer your questions, and give you a fair and honest quote for the services you need. Our chip flooring can be installed in as little as one day by DC Generals' trained and certified flooring experts.

Get Epoxy Floor Coating Quotes

Find an Epoxy Floor Contractor in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates