Metal Roof Cost in Angleton, Texas

Metal roof cost in Angleton, Texas ranges from $6,000 to $32,900 depending on the size of your roof and type of roof system used. A basic 1,500-sf standing seam metal roof costs around $11,550. Metal roof cost ranges from $6.00 to $9.40 per square foot. The term "metal roof" includes roof types such as copper, galvanized steel, aluminum, stainless steel, and zinc. Therefore the prices in this guide are general in nature. To get a more accurate cost for your metal roof project, request a quote.

By HomeBlue Team

Updated July 30, 2021 05:12 PM

Get Matched to Metal Roofing Companies Near You

Find local roofing companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates

How Much Does a Metal Roof Cost in Angleton, TX?

This guide is intended to provide you an approximate cost of a metal roof in your area. Metal roof cost varies significantly depending upon the material used and thus requires a detailed estimate. To get a quote for your specific project, Click Here for a Free Estimate. Our research, which includes feedback provided by local roofing contractors, resulted in the following metal roof prices in Angleton, TX.

Metal roof cost:

Metal roof cost in Angleton, Texas ranges from $6,000 to $32,900 depending on the size of your roof and type of roof system used.

New roof cost based on the size of your roof:

Metal roof cost (1,000 sf roof / 10 squares): $6,000 to $9,400.
Metal roof cost (1,500 sf roof / 15 squares): $9,000 to $14,100.
Metal roof cost (2,000 sf roof / 20 squares): $12,000 to $18,800.
Metal roof cost (2,500 sf roof / 25 squares): $15,000 to $23,500.
Metal roof cost (3,000 sf roof / 30 squares): $18,000 to $28,200
Metal roof cost (3,500 sf roof / 35 squares): $21,000 to $32,900.

Metal roof cost per square foot:

Average cost of metal roof ranges from $6.00 to $9.40 per square foot.

Free Quotes from Roofers Near You

Find a Roofer in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Click to Get Quotes

Factors that Influence Metal Roof Cost in Angleton

When a contractor comes to your house to provide you an estimate, they will consider a number of factors that can increase or decrease the cost of your project. Pricing for your metal roof project will vary based on the height of your house, the size of your house, and the type of metal you chose, and the type of shingle you select. Here are a few things to keep in mind:

Your prices may be higher when:

Your house has multiple stories.
The roof has a steep pitch.
The roof is complex, has multiple gable roofs, or has multiple roof areas.
If you use higher quality metal (copper or zinc).
You choose a standing seam type roof over a shingle or sheet roof.
The roof underlayment is deteriorated and needs to be replaced.
Existing roof needs to be removed prior to installing new roof.
A storm recently impacted your region (contractors are booked).

Your prices may be lower when:

You have a single story home.
The roof has a normal pitch (it is not steep).
Existing roof does not need to be removed.
The roof stucture and underlayment is in good condition.
You select a standard quality metal like galvanized steel.
You use metal shingles or sheets rather than a standing seam roof.
The house has only one roof.
The roof is easy to access.
You get the work done during the dry season.

Price(less) Quotes from Local Roofers Near Angleton, TX

JC Metal Roofing Make an educated decision and choose us for your next roofing project. Enjoy a lifetime of benefits and savings. The more a homeowner understands about metal roofing and the options available to them, the more obvious and practical a solution it becomes. We are the only roofing contractor in Brazoria County with a TDI Certified metal roofing panel. We roll form our panels on site. We have over 20 years of experience working with TDI and engineer firms in assisting with your Windstorm Certification (WPI-8). Brazoria County is one of 13 counties along the Texas Gulf Coast where roofing installations have to be certified by TDI for high-wind applications. Most contractors in the state do not understand all of the rules, regulations, and guidelines.

Houston Metal Roofing Services Metal Roofing will outlast typical composition roofing by well over 35 years. It is quite likely the last roof you will ever purchase. Metal roofs add to the elegance and resale value of your home. They are more durable and stand up to the challenging Houston heat and hurricane force winds. The high end finish of metal roofing will not fade. crack, or leave you with the dark mold spots that make a roof look so unattractive. One of the largest benefits to owning a metal roof are the energy savings! Metal roofing is a green product choice. Aluminum roofing is made of up to 95% recycled aluminum and are 100% recyclable. Steel roofs are made of 35 to 50% recycled material and are also 100% recyclable. Cool metal roofing can achieve reflective values of more than 70% and emittance values as high as 90%. In a government study, Oak Ridge National Lab determined painted metal roofs maintain 95% of their reflective value over time.

Get Metal Roofing Contractor Quotes

Find a roofing contractor in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates